东莞市天赛塑胶机械有限公司在低压注塑行业*创安全阀和胶泵动态监控系统

	东莞市天赛塑胶机械有限公司在低压注塑行业*创安全阀和胶泵动态监控系统，基于微电脑控制，清楚了解安全阀和齿轮泵的工作壮态。自动对安全阀实际注胶压力进行调整,达到设定压力和实际压力完全一致。同时对胶泵的寿命、注胶量进行监控，出现异常时会自动报警。安全阀和胶泵是低压注胶设备的核心部件，直接关系着产品的良品率，安全阀和胶泵动态检测系统实现了提前报警，杜绝了因安全阀和胶泵异常带来的产品不良，同时进一步满足了压力和注胶量敏感的电子产品生产。


	信息来源： 


	 


	LPMS innovated safety valve and gear pump
dynamic monitoring system


	 LPMS
innovated safety valve and gear pump dynamic monitoring system. It is
controlled by  microcomputer and it can monitoring safety valve and gear
pump working status and adjust the injection pressure to make sure the actual
injection pressure is the same as the set injection pressure. Also it can
moitoring the shot size and the gear pump wear out situation. The touch screen
will show alarm information if the safety valve or gear pump is not functional.


	Information Source: